Loading ...
Loading ...
Loading ...
Thermal Imagers
Using the Menu
11
To enable or disable the Centerbox feature:
1. Press F2 until Settings appears over F3.
2. Press softkey labeled Settings.
3. Press F2 until Centerbox appears over F3.
4. Press softkey labeled Enable to activate Centerbox feature.
5. Press softkey labeled Disable to deactivate Centerbox feature.
To set the size of the Centerbox when enabled:
1. Press to increase the size of the Centerbox.
2. Press to reduce the size of the Centerbox.
3. When satisfied with the size of the Centerbox, press Done to accept the
setting.
4. Continue adjusting other items in the Settings menu, or quickly squeeze
and release the trigger twice to return to the live view.
Setting File Format
Data stored on the Imager’s SD memory card can be saved in three different
file formats: .bmp, .jpeg, and .is2. This setting is saved and remains valid when
the Imager is turned off and back on. It can always be changed to another
format prior to capturing images.
To change the file format:
1. Press until the F3 softkey label reads Settings.
2. Press the softkey labeled Settings.
3. Within the Settings Menu, press , labeled Menu, until the F1 softkey
reads File Format.
4. Press until File Format appears over softkey F3.
5. Press the softkey labeled File Format.
6. Press the softkey labeled Up () or Down () to select either bitmap
(.bmp) file format, jpeg (.jpeg/.jpg) format, or (.is2) file format according
to your needs.
7. Press softkey labeled Done when finished.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...