Loading ...
Loading ...
Loading ...
Ti32, TiR32, Ti29, TiR29, Ti27, TiR27
Users Manual
18
1. Point camera at the area of interest and pull the trigger to capture an
image. This will freeze the image in the display and bring up the Image
Capture menu.
2. Press the softkey labeled Store. If the SD memory card is in the Imager
and there is enough room left on the card, the information is stored.
Caution
Do not remove the SD memory card while storing an
image. Image data may be lost.
Note
Before you store an image, make sure the write protect lock on the SD
memory card is in the open position.
Adjusting the Thermal Image
The Imager uses different colors or shades of gray to display the temperature
gradient of the area within the Imager’s field of view. There are two
adjustments for changing how the Imager displays the image: Palette and
Range.
Selecting a Standard Palette
The palette menu provides different thermal viewing patterns. Grayscale, Blue-
Red, High Contrast, Ironbow, Amber, and Hot Metal are available on both
Imagers. To select a standard palette:
1. Press until Palette appears over .
2. Press the softkey labeled Palette to display the available palette options.
(Standard or Ultra Contrast)
3. Press the softkey labeled Standard.
4. Press the softkey labeled Up or Down to move between the palette
options.
5. Press the softkey labeled Done to set the Imager to the selected palette.
6. Wait for main menu to disappear or quickly squeeze and release the
trigger twice in order to return to live view.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...