Loading ...
Loading ...
Loading ...
Ti32, TiR32, Ti29, TiR29, Ti27, TiR27
Users Manual
16
To select or change the lens in use on the Imager:
1. Press until the F3 softkey label reads Settings.
2. Press the softkey labeled Settings.
3. Within the Settings Menu, press , labeled Menu, until the F3 softkey
reads Lens.
4. Press the softkey labeled Lens.
5. Press the softkey labeled Up () or Down () to select the lens.
6. Press the softkey labeled Done when finished.
7. Continue adjusting other items in the Settings Menu, or quickly squeeze
and release the trigger twice to return to live view.
If you have the Display Information setting on your Imager set to Display All,
a
symbol appears with the wide-angle lens selection. A symbol
appears on the lower part of the LCD with the telephoto lens selection. The
default condition is the standard lens with no indicator symbol.
Note
IR-Fusion
®
is disabled when you set the Imager to the wide angle lens
selection.
Caution
Failure to select the proper lens on your Imager may result
in inaccurate temperature measurement values.
When finished using the optional lens, remove it from the Imager:
1. Gently push in on the optional lens and rotate counter-clockwise until lens
disengages from Imager.
2. Remove optional lens and replace properly with lens cap into its storage
case.
3. Select the standard lens in the proper section of the menu system to return
to normal operation with that lens.
Note
For the best protection and longest life, always remember to store an
optional lens in its protective cases with the lens covers on.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...