Loading ...
Loading ...
Loading ...
Appendix B. DIP Switch
B.1 DIP Switch Descripon
The DIP switch is on the main lane control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is o. If you
set the DIP switch like the gure displayed below, its binary value is 00001100, and its decimal
value is 12.
B.2 DIP Switch Corresponded
Funcons
Note
Aer seng the DIP switch, you should reboot the device, or the funcon cannot take eect.
The 8-bit DIP switch corresponded funcons on the access control board are as follows:
Bit
Device Mode Funcon Decimal Value DIP Switch
Address Diagram
1 to 2 Work Mode Normal Mode 0
Study Mode 1
Test Mode 2
3 Memory Mode Enable Memory
Mode
0
DS-K3B601SX Series Swing Barrier Quick Start Guide
38
Loading ...
Loading ...
Loading ...