Loading ...
Loading ...
Loading ...
UART1 Jumper Cap
Use the jumper cap to switch the serial port communicaon mode with the main lane
controller. You can switch between the RS-485
communicaon mode and the RS-232
communicaon mode. By default, it is in RS-485 communicaon mode.
Lane
Use the jumper cap to switch the serial port communicaon mode with the lane controller. By
default, the interface is wired and it is in RS-485
communicaon mode. If wiring other
controllers (compable with Hikvision communicaon protocol), use the jumper cap to switch
between RS-485 and RS-232 communicaon mode.
UART4
The serial port is in the wiring interface according to the picture above, which has a xed RS-232
communicaon mode to communicate with the main lane controller. It contains no jumper cap
and cannot change the communicaon mode.
UART7/UART8
Reserved serial port. The serial port has a xed RS-232 communicaon mode. It contains no
jumper cap and cannot change the communicaon mode, which can connect with a QR code
scanner.
The reserved interface
posions in the turnsle and their corresponded UART No. are as follows:
Note
The diagram is for reference only.
DS-K3B601SX Series Swing Barrier Quick Start Guide
21
Loading ...
Loading ...
Loading ...