Hikvision DS-K3B601SX Pro Swing Barrier

Quick Start Guide - Page 39

For DS-K3B601SX.

PDF File Manual, 56 pages, Read Online | Download pdf file

DS-K3B601SX photo
Loading ...
Loading ...
Loading ...
Chapter 5 Device Sengs
Aer installaon and wiring completed, the turnsle will learn the open and closed posion
automacally.
Aer
the learning, the turnsle is in the normal mode. You can also set the turnsle to test mode,
passing mode and memory mode, pair the keyfob, inialize the hardware, switching between
RS-485
communicaon mode and RS-232 communicaon mode, and view relay output NO/NC
diagram by seng the DIP switch on the access control board.
Study Mode: The barrier will learn the closed
posion.
Normal Mode: The device will work properly. The device will work properly. The barrier posion
congured in study mode is the closed posion when the device is working normally.
Test Mode: Test mode is the same as the normal mode except that the device cannot report the
alarm, the event, or the people
counng informaon to the center.
Passing Mode: There are 9 passing modes, including controlled
bi-direcon, controlled entrance
and prohibited exit, controlled entrance and free exit, free bi-direcon, free entrance and
controlled exit, free entrance and prohibited exit, prohibited bi-direcon, prohibited entrance
and free exit.
Memory Mode: By default, the memory mode is enabled. When
mulple cards are presented
and authencated, it allows mulple persons passing through the lane. When it counts the
passing people number is equal to the card presented
mes, or no person passing through the
lane aer the last person passing, the barriers will be closed.
Note
You can also set the DIP switch on the access control board to control the entrance and exit
controlling type, keyfob pairing, etc. For details about the DIP switch value, see DIP Switch .
5.1 Set Study Mode
Enter the study mode through DIP switching to set the closed posion of the device barrier.
Steps
1. Set The No.1 of the 8-digit DIP Switch on the main control board to ON by referring the
following
gure to enter the study mode.
2. Adjust the closed posion of the barrier.
3. Power on the device.
The device will remember the current
posion (closed posion) automacally.
DS-K3B601SX Series Swing Barrier Quick Start Guide
28
Loading ...
Loading ...
Loading ...