![PFD 404 U [240V] photo](https://manualsfile.com/images/appliances/k4ijb3cjfq6_4_1711116005_thumbnail.webp)
Loading ...
Loading ...
Loading ...
Additional settings
65
Final rinse temperature
The final rinse temperature is reached by
heating up the wash water. The temperature
needs to be adjusted to the task.
This menu option is not available on dish-
washers with Dry+ drying.
OK
08:15
78
79
80
°C
81
82
Final rinse temperature
Set the temperature. The adjustment
range varies depending on the model and
program.
Press OK to save the setting.
Final rinse holding time
The holding time is a period during which
the temperature in the wash block is kept
constant.
In the case of the Rapid program, the
holding time is entered in seconds and
can be adjusted in 5-second increments.
OK
08:15
Final rinse holding time
10
9
8
min
7
6
Set the holding time.
Press OK to save the setting.
Increased water level
It is then advisable to increase the water
level when a lot of water is absorbed due to
the structure of the wash items or when the
type of soiling and the process chemicals
used lead to excess foam development. The
additional volume of water depends on the
type of basket or mobile unit used, the type
of soiling, and the wash items.
If slightly soiled wash items which absorb a
little water are being reprocessed, the water
level can be reset to the factory default to
save water and energy.
OK
08:15
2,0
1,5
1,0
0,5
0,0
Increas. water quantity
l
Set the additional volume of water. In the
lowest setting, the volume of water corre-
sponds to the factory default.
Press OK to save the setting.
Loading ...
Loading ...
Loading ...