![PFD 404 U [240V] photo](https://manualsfile.com/images/appliances/k4ijb3cjfq6_4_1711116005_thumbnail.webp)
Loading ...
Loading ...
Loading ...
Operation
46
End of the program
After a program has ended normally, the
LED of the Start/Stopbutton will go out and
the following will appear on the display.
Program completed successfully
In addition to this, an audible signal will
sound for approx. 3seconds (factory de-
fault). The audible signal is repeated three
times every 30seconds. To change audible
signal settings; see “Volume”.
Tap to acknowledge the display.
If system messages are present, they are
displayed afterward, e.g., if the salt con-
tainer level or the level of the liquid process
chemicals containers was low during the
program, or when the next service is due.
Every message needs to be acknowledged
individually by pressing OK.
Switching off
Press the button until the display turns
off.
Unloading the dishware
Dishware tends to break and chip more eas-
ily when it is hot. Allow the dishes to cool in
the dishwasher until they are comfortable
enough to handle before unloading them.
The dishware will cool much faster if you
open the door when the program has
ended.
Unload the lower basket first, and then the
upper basket. This will prevent water drops
from the upper basket from falling onto the
dishware in the lower basket.
Interrupting a program
A program which is already running should
only be interrupted if strictly necessary, e.g.,
if the wash items are moving significantly.
Danger of scalding, burning, and
chemical burns
The wash items, the load carrier, and the
interior of the wash cabinet may be very
hot.
Steam may also escape when the door is
opened. Depending on the wash phase,
process chemicals may be dissolved
within the steam, which can cause irrita-
tion and burns in the eyes and respiratory
tract.
A program should only be interrupted if
strictly necessary.
Open the door slowly and carefully and
avoid contact with the steam that may es-
cape. Touch the wash items at your own
risk.
Open the door (see “Opening and closing
the door”).
If the temperature in the wash cabinet is
more than 153°F (67°C), the following mes-
sage alerts you to possible dangers when
opening the door.
OK
Hot wash cabinet: Risk of injury, take
care when opening the door.
Confirm the message with OK.
Rearrange the wash items so that they are
stable.
After the door is closed, the following mes-
sage will appear in the display: Press “Start”
to continue.
Press the Startbutton to continue the pro-
gram.
Loading ...
Loading ...
Loading ...