Loading ...
Loading ...
Loading ...
4
1. PREPARE THE INSTALLATION
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Hood
- Accessories • Decorative flue assembly (lower and upper flues)
• Hood mounting bracket
• Upper flue mounting bracket
• 2 Thin baffle filters
• 2 Filter knobs with screws, taped inside the hood
• 8” round adapter/damper (for vertical discharge), in a separate box
• 3¼” x 10” adapter/damper (for horizontal discharge)
• Installation manual
• Bag of parts including: 5 no. 8 x 1½” countersunk screws, 8 no. 8 x 3/4” screws, 6 no. 8 x 3/8” screws,
6 drywall anchors, 3 washers, 2 no. 8 x 1/2, 2 neoprenes. If need be, discard extra hardware.
Parts sold separately:
- Duct, elbows, wall and roof caps. Refer to page 3 for a complete list of venting options and model numbers.
- Non-duct kit model no 09025, mandatory for non-ducted installation.
- Optional flue extension for 10-ft. ceilings model no. 09019.
NOTE: During installation, protect countertop and/or cooktop.
WARNING
!
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
2. SELECT INSTALLATION TYPE
2.1 NON-DUCTED INSTALLATION
Non-duct kit model 09025 is required for a non-ducted installation.
2.2 DUCTED INSTALLATION
Plan where and how the ductwork will be installed.
Install proper-sized ductwork, elbows and roof or wall cap depending on the type of installation. For vertical discharge, use
8” round ductwork and for horizontal discharge use 3¼” x 10” ductwork. Use metal foil duct tape to seal duct joints.
2.3 ALL INSTALLATIONS
The minimum hood distance above cooktop must not be less than 24” (30” over
a gas range). A maximum of 30” above cooktop is recommended for best
capture of cooking impurities.
Distances over 30” are at the installer and users discretion; providing that ceiling
height and decorative flue length permit allows it.
NOTE: There are 2 different heights for the horizontal ductwork.
Refer to steps 4 and 6 for more details.
8” ROUND DUCT
ROOF CAP
3¼” X 10”
DUCT
WALL
CAP
HOOD
DECORATIVE
FLUE
HH0134A
REFER TO CHART
FOR DISTANCE ABOVE
COOKING
SURFACE
CEILING HEIGHT
MINIMUM HOOD DISTANCE ABOVE
ELECTRIC RANGE COOKTOP
MINIMUM HOOD DISTANCE
ABOVE GAS RANGE COOKTOP
8 FT. 24 IN. 30 IN.
9
FT. 29½ IN. 30 IN.
10
FT.* 25 IN. 30 IN.
* 10-ft. ceilings require flue extension model no. 09019 (sold separately).
Loading ...
Loading ...
Loading ...