April 2023
QSG1_A_EN
Apply to: Argus Track, Argus Track Plus
Quick Start Guide
@ReolinkTech https://reolink.com
58.03.001.0327A
English English1 2
What's in the Box
Camera
Quick Start Guide
Strap
Surveillance Sign
Mounting Hole
Template
EN
Content
What’s in the Box ············································································2
Camera Introduction ········································································3
Set up the Camera ··········································································4
Charge the Camera ·········································································6
Install the Camera ···········································································7
Safety Instructions of Battery Usage ·························································10
Troubleshooting ·············································································11
Specication ················································································12
Notication of Compliance ··································································12
USB-C Cable
Pack of Screws Reset Needle
Mounting Bracket
English English1 2
What's in the Box
Camera
Quick Start Guide
Strap
Surveillance Sign
Mounting Hole
Template
EN
Content
What’s in the Box ············································································2
Camera Introduction ········································································3
Set up the Camera ··········································································4
Charge the Camera ·········································································6
Install the Camera ···········································································7
Safety Instructions of Battery Usage ·························································10
Troubleshooting ·············································································11
Specication ················································································12
Notication of Compliance ··································································12
USB-C Cable
Pack of Screws Reset Needle
Mounting Bracket
English English3 4
Camera Introduction
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
Speaker
USB-C Port
Back Cover
Screws for Installing the Back Cover
Wide-Angle Lens
Indicator Light
Telephoto Lens
Daylight Sensor
Mic
Infrared Light
Spotlights
microSD Card Slot
Power Switch
Reset Button
* Press for more than ve seconds to
reset the device to factory settings.
11
12
13
14
1
2
3
4
5
6
7
8
9
10
1
2
4
5
6
7
14
8
10
12
11
3
Set up the Camera
Set up the Camera Using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
9
13
OFF
ON
English English3 4
Camera Introduction
Dierent states of the status LED:
Red Light: WiFi connection failed Blinking: Standby status
Blue Light: WiFi connection succeeded On: Working status
Speaker
USB-C Port
Back Cover
Screws for Installing the Back Cover
Wide-Angle Lens
Indicator Light
Telephoto Lens
Daylight Sensor
Mic
Infrared Light
Spotlights
microSD Card Slot
Power Switch
Reset Button
* Press for more than ve seconds to
reset the device to factory settings.
11
12
13
14
1
2
3
4
5
6
7
8
9
10
1
2
4
5
6
7
14
8
10
12
11
3
Set up the Camera
Set up the Camera Using a Smartphone
Step 1 Scan to download the Reolink App from the App Store or Google Play store.
Step 2 Turn on the power switch to power on the camera.
9
13
OFF
ON
English English5 6
Charge the Camera
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to nish initial setup.
NOTE: This device supports 2.4 GHz and 5 GHz Wi-Fi networks. It is recommended to connect the
device to 5 GHz Wi-Fi for a better network experience.
Charge the battery with a
power adapter. (not included).
Charge the battery with the Reolink
Solar Panel (Not included if you only
purchase the camera).
For better weatherproof performance, please
always cover the charging port with the rubber
plug after charging the camera.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
and follow the onscreen instructions to nish initial setup.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Orange LED: Charging Green LED: Fully charged
Charging Indicator:
It’s recommended to fully charge the camera before installing it.
English English5 6
Charge the Camera
Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera.
Scan the QR code on the device and follow the onscreen instructions to nish initial setup.
NOTE: This device supports 2.4 GHz and 5 GHz Wi-Fi networks. It is recommended to connect the
device to 5 GHz Wi-Fi for a better network experience.
Charge the battery with a
power adapter. (not included).
Charge the battery with the Reolink
Solar Panel (Not included if you only
purchase the camera).
For better weatherproof performance, please
always cover the charging port with the rubber
plug after charging the camera.
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Step 2 Launch the Reolink Client, click the “ ” button, input the UID code of the camera to add it
and follow the onscreen instructions to nish initial setup.
Set up the Camera on PC (Optional)
Devices
Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Orange LED: Charging Green LED: Fully charged
Charging Indicator:
It’s recommended to fully charge the camera before installing it.
English English7 8
Install the Camera
• Install the camera 2-3 meters
(7-10 ft) above ground. This
height maximizes the detection
range of the PIR motion sensor.
• For eective detection, please
install the camera angularly.
Notes on Camera
Installation Position
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters
NOTE: If a moving object approaches
the PIR sensor vertically, the camera
may fail to detect motion.
Mount the Camera
Drill holes in accordance with the mounting
hole template.
Install the mounting bracket with screws
included in the package.
Attach the camera base to the bracket.
Choose a proper direction for the camera and
then align the bracket to the security mount
and lock the camera in place by turning it
clockwise.
NOTE: Use the drywall anchors included in the package if needed.
1
2
“
click
”
“
click
”
English English7 8
Install the Camera
• Install the camera 2-3 meters
(7-10 ft) above ground. This
height maximizes the detection
range of the PIR motion sensor.
• For eective detection, please
install the camera angularly.
Notes on Camera
Installation Position
Mounting Height:
2-3 Meters
PIR Detection Distance:
2-10 Meters
NOTE: If a moving object approaches
the PIR sensor vertically, the camera
may fail to detect motion.
Mount the Camera
Drill holes in accordance with the mounting
hole template.
Install the mounting bracket with screws
included in the package.
Attach the camera base to the bracket.
Choose a proper direction for the camera and
then align the bracket to the security mount
and lock the camera in place by turning it
clockwise.
NOTE: Use the drywall anchors included in the package if needed.
1
2
“
click
”
“
click
”
English English9 10
NOTE: To minimize the monitoring blind spot,
the bracket is designed with a 10° inclination.
Tighten the bracket and the camera base with
a screw.
3
Safety Instructions of Battery Usage
(For Battery-Powered Cameras)
The camera is not designed for running 24/7 at full capacity or around-the-clock live streaming.
It’s designed to record motion events and remotely view live feed as needed. Learn useful tips on
how to extend the battery life in this post:
How to Extend the Battery Life of Reolink Battery Powered Cameras – Reolink Support
1. Do not remove a built-in battery from the camera.
2. Charge the battery with a standard and high-quality DC 5V battery charger or Reolink solar
panel. It’s not compatible with solar panels from any other brands.
3. Charge the battery only if in temperatures between 0°C and 45°C. The battery is intended for
use only in temperatures between -10°C and 55°C.
4. Keep the charging port dry, clean and free of any debris. Cover it with the rubber plug after the
battery is fully charged.
5. Do not charge, use or store the battery next to areas that may become hot. Examples include,
but are not limited to, on or near a space heater, cooking surface, cooking appliance, iron,
radiator, or replace.
6. Do not use the battery if its case appears damaged, swollen, or compromised. Examples include,
but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
7. Always follow the local waste and recycling laws to dispose of used batteries.
10°
English English9 10
NOTE: To minimize the monitoring blind spot,
the bracket is designed with a 10° inclination.
Tighten the bracket and the camera base with
a screw.
3
Safety Instructions of Battery Usage
(For Battery-Powered Cameras)
The camera is not designed for running 24/7 at full capacity or around-the-clock live streaming.
It’s designed to record motion events and remotely view live feed as needed. Learn useful tips on
how to extend the battery life in this post:
How to Extend the Battery Life of Reolink Battery Powered Cameras – Reolink Support
1. Do not remove a built-in battery from the camera.
2. Charge the battery with a standard and high-quality DC 5V battery charger or Reolink solar
panel. It’s not compatible with solar panels from any other brands.
3. Charge the battery only if in temperatures between 0°C and 45°C. The battery is intended for
use only in temperatures between -10°C and 55°C.
4. Keep the charging port dry, clean and free of any debris. Cover it with the rubber plug after the
battery is fully charged.
5. Do not charge, use or store the battery next to areas that may become hot. Examples include,
but are not limited to, on or near a space heater, cooking surface, cooking appliance, iron,
radiator, or replace.
6. Do not use the battery if its case appears damaged, swollen, or compromised. Examples include,
but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
7. Always follow the local waste and recycling laws to dispose of used batteries.
10°
English English11 12
Troubleshooting
If your camera is not powering on,
please apply the following solutions:
• Make sure the power switch is turned on
.
• Charge the battery with a DC 5V/2A power
adapter. When the green light is on, the
battery is fully charged.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
If the camera cannot scan the QR code on
your phone, please try the following solutions:
• Remove the protective lm from the camera
lens.
• Wipe the camera lens with a dry paper/
towel/tissue.
• Vary the distance between your camera
and the mobile phone so that the camera can
focus better.
Camera is Not Powering On
Failed to Scan QR Code on
Smartphone
• Try to scan the QR code under sucient
lighting.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU and Directive 2014/30/EU.
Dimension: L84mm*W85mm*H118mm
Weight (Battery included):476g
Operating Temperature:
-10°C~ 55°C (14°F~131°F)
For more specications, visit
https://reolink.com
Specication
Notication of
Compliance
Reolink declares that this product is in
compliance with Radio Equipment
Regulations 2017 and Electromagnetic
Compatibility Regulations 2016.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
UKCA Declaration of Conformity
CE Declaration of Conformity
FCC Compliance Statements
English English11 12
Troubleshooting
If your camera is not powering on,
please apply the following solutions:
• Make sure the power switch is turned on
.
• Charge the battery with a DC 5V/2A power
adapter. When the green light is on, the
battery is fully charged.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
If the camera cannot scan the QR code on
your phone, please try the following solutions:
• Remove the protective lm from the camera
lens.
• Wipe the camera lens with a dry paper/
towel/tissue.
• Vary the distance between your camera
and the mobile phone so that the camera can
focus better.
Camera is Not Powering On
Failed to Scan QR Code on
Smartphone
• Try to scan the QR code under sucient
lighting.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU and Directive 2014/30/EU.
Dimension: L84mm*W85mm*H118mm
Weight (Battery included):476g
Operating Temperature:
-10°C~ 55°C (14°F~131°F)
For more specications, visit
https://reolink.com
Specication
Notication of
Compliance
Reolink declares that this product is in
compliance with Radio Equipment
Regulations 2017 and Electromagnetic
Compatibility Regulations 2016.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
UKCA Declaration of Conformity
CE Declaration of Conformity
FCC Compliance Statements
English English13 14
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Caution: Changes or modications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator and
your body.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
L’ émetteur/récepteur exempt de licence
contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences
et Développement économique Canada
applicables aux appareils radio exempts de
licence. L’ exploitation est autorisée aux deux
conditions suivantes :
(1) L’ appareil ne doit pas produire de
brouillage;
(2) L’ appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.
FCC Radiation Exposure statement
ISED Compliance Statements
This equipment complies with IC RSS-102
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
minimum distance 20 cm between the
radiator and your body.
Cet équipement est conforme aux limites
d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé
avec une distance minimale de 20 cm entre
le radiateur et votre corps. Cet émetteur ne
doit pas être colocalisé ou fonctionner en
conjonction avec une autre antenne ou un
autre émetteur.
NOTE: Operation of 5150-5250 MHz is
restricted to indoor use only in Canada.
Le fonctionnement de 5150-5250 MHz est
limité à une utilisation en intérieur uniquement.
ISED Radiation Exposure statement
English English13 14
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
Caution: Changes or modications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20cm between the radiator and
your body.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
L’ émetteur/récepteur exempt de licence
contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences
et Développement économique Canada
applicables aux appareils radio exempts de
licence. L’ exploitation est autorisée aux deux
conditions suivantes :
(1) L’ appareil ne doit pas produire de
brouillage;
(2) L’ appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le
fonctionnement.
FCC Radiation Exposure statement
ISED Compliance Statements
This equipment complies with IC RSS-102
radiation exposure limits set forth for an
uncontrolled environment. This equipment
should be installed and operated with
minimum distance 20 cm between the
radiator and your body.
Cet équipement est conforme aux limites
d’exposition aux radiations IC CNR-102
établies pour un environnement non contrôlé.
Cet équipement doit être installé et utilisé
avec une distance minimale de 20 cm entre
le radiateur et votre corps. Cet émetteur ne
doit pas être colocalisé ou fonctionner en
conjonction avec une autre antenne ou un
autre émetteur.
NOTE: Operation of 5150-5250 MHz is
restricted to indoor use only in Canada.
Le fonctionnement de 5150-5250 MHz est
limité à une utilisation en intérieur uniquement.
ISED Radiation Exposure statement
English English15 16
This marking indicates that this product
should not be disposed with other household
wastes.throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmentally safe recycling.
Correct Disposal of This Product
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of
reach of children.
Terms and Privacy
OPERATING FREQUENCY :
(the maximum transmitted power)
2.4GHz: (For 2.4GHz camera only):
2.4 GHz EIRP < 20dBm
5GHz:
5 GHz EIRP < 23dBm
5.8GHz EIRP < 14dBm
If you need any technical help, please visit our
ocial support site and contact our support
team before returning the products,
https://support.reolink.com.
WiFi Operating Frequency
Technical Support
This product comes with a 2-year limited
warranty that is valid only if purchased from
Reolink Ocial Store or a Reolink authorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
Limited Warranty
The functions of Wireless Access
Systems including Radio Local
Area Networks(WAS/RLANs) within
the band 5150-5350 MHz for this device
are restricted to indoor use only within all
European Union countries (BE/BG/CZ/
DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/
LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/
FI/SE/TR/N O/CH/IS/LI/UK(NI)
English English15 16
This marking indicates that this product
should not be disposed with other household
wastes.throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse
of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmentally safe recycling.
Correct Disposal of This Product
Use of the product is subject to your
agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of
reach of children.
Terms and Privacy
OPERATING FREQUENCY :
(the maximum transmitted power)
2.4GHz: (For 2.4GHz camera only):
2.4 GHz EIRP < 20dBm
5GHz:
5 GHz EIRP < 23dBm
5.8GHz EIRP < 14dBm
If you need any technical help, please visit our
ocial support site and contact our support
team before returning the products,
https://support.reolink.com.
WiFi Operating Frequency
Technical Support
This product comes with a 2-year limited
warranty that is valid only if purchased from
Reolink Ocial Store or a Reolink authorized
reseller. Learn more:
https://reolink.com/warranty-and-return/.
Limited Warranty
The functions of Wireless Access
Systems including Radio Local
Area Networks(WAS/RLANs) within
the band 5150-5350 MHz for this device
are restricted to indoor use only within all
European Union countries (BE/BG/CZ/
DK/DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/
LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/
FI/SE/TR/N O/CH/IS/LI/UK(NI)
April 2023
QSG1_A_EN
Apply to: Argus Track, Argus Track Plus
Quick Start Guide
@ReolinkTech https://reolink.com
58.03.001.0327A
