Loading ...
Loading ...
Loading ...
Chapter 52 Static Route
XMG1915 Series User’s Guide
305
Figure 219 Static Routing Overview
52.1.1 What You Can Do
Use the IPv4 Static Route screen (Section 52.2 on page 305) to configure and enable an IPv4 static route.
Use the IPv6 Static Route screen (Section 52.3 on page 307) to configure and enable an IPv6 static route.
52.2 IPv4 Static Route
Click NETWORKING > Static Routing > IPv4 Static Route to display the screen as shown.
Figure 220 NETWORKING > Static Routing > IPv4 Static Route
The following table describes the related labels you use to create a static route.
N1
N2
Table 172 NETWORKING > Static Routing > IPv4 Static Route
LABEL DESCRIPTION
Index This field displays the index number of the route.
Active This field displays whether the static route is activated or not.
Name This field displays the descriptive name for this route. This is for identification purposes only.
Destination
Address
This field displays the IP network address of the final destination.
Subnet Mask This field displays the subnet mask for this destination.
Gateway
Address
This field displays the IP address of the gateway. The gateway is an immediate neighbor of your
Switch that will forward the packet to the destination.
Metric This field displays the cost of transmission for routing purposes.
Loading ...
Loading ...
Loading ...