Loading ...
Loading ...
Loading ...
Chapter 48 VLAN
XMG1915 Series User’s Guide
268
Figure 186 Port VLAN Trunking
48.2.0.2 VLAN Priority
At the time of writing, you can create static VLANs, Voice VLANs, MAC-based VLANs and Vendor ID-
based VLANs on the Switch when the VLAN type is set to 802.1Q. When a packet is received, the Switch
processes the VLAN rules in sequence. The sequence (priority) of the VLANs is:
1 Vendor ID Based VLAN
2 Voice VLAN
3 MAC Based VLAN
If the packet matches a VLAN rule that has a higher priority, for example, an entry with weight 250 in the
vendor ID to VLAN mapping table, the Switch assigns the corresponding VLAN ID to the packet and
stops checking the subsequent VLAN rules.
48.2.0.3 Select the VLAN Type
Select a VLAN type in the SYSTEM > Switch Setup screen.
Figure 187 SYSTEM > Switch Setup: Select VLAN Type
802.1Q Static VLAN
Make sure 802.1Q is selected in the SYSTEM > Switch Setup screen.
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
Loading ...
Loading ...
Loading ...