Loading ...
Loading ...
Loading ...
Steps:
1. Loosen screws to take apart the junction box.
2. Paste the drill template for junction box to the place
where you want to install the camera.
3. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Figure 2-41 Drill Template for Junction Box
4. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
5. Secure the junction box body on the ceiling with three
PA4 × 25 screws that come with the junction box.
Figure 2-42 Secure Junction Box Body
6. Route the cables through the bottom cable hole or
the side cable hole of the junction box.
7. Combine the junction box cover with its body and
secure it with three PM3 × 13 screws.
Figure 2-43 Combine Junction Box Cover and Body
8. Fix the base onto the junction box cover with three
M4 × 10 screws.
Figure 2-44 Fix Base
9. Connect the power cord and video cable and put the
cables back into the junction box.
10. Repeat the step 6, 8, and 9 of 2.4.1 Ceiling/Wall
Mounting to adjust the angle and finish the
installation.
Loading ...
Loading ...
Loading ...