Loading ...
Loading ...
Loading ...
Figure 2-13 Lock Cover to Body
10. Repeat steps 6 to 7 of 2.1.1 Ceiling/Wall Mounting to
adjust the angle and finish the installation.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting
Before you start:
Ceiling mounting and wall mounting are similar. Following
steps take ceiling mounting as an example.
Steps:
1. Paste the drill template (supplied) to the place where
you want to install the camera.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall plugs.
Screw
Hole
Screw
Hole
Screw
Hole
template
Cable
Hole
Figure 2-14 Drill Template
3. (Optional) Drill the cable hole, when the cables are
routed through the ceiling.
4. Align the screw holes in the bracket to the ceiling, and
secure the camera with three PA4 × 25 screws
(supplied).
Figure 2-15 Secure Camera to Ceiling
5. Connect the power cord and video cable.
6. Power on the camera to check whether the image on
the monitor is gotten from the optimum angle. If not,
adjust the camera according to the figure below.
Rotation Position
[0° to 360°]
Tilt Position
[0° to 180°]
Pan Position
[0° to 360°]
Trim Ring
Screw
Thumbscrew
Figure 2-16 3-Axis Adjustment
1). Loosen the trim ring to adjust the pan position [0°
to 360°].
Loading ...
Loading ...
Loading ...