Loading ...
Loading ...
Loading ...
Figure 2-24 Combine Junction Box Cover and Body
8. Fix the gang box onto the junction box cover with PA4
× 10 screws that come with the junction box.
9. Connect the power cord and video cable and put the
cables back into the junction box.
10. Press the camera base to the gang box. Turn the
camera clockwise until it snaps into the gang box.
11. Refer to step 6 to 7 of 2.3.1 Ceiling/Wall Mounting to
adjust the angle and finish the installation.
Figure 2-25 Finish Installation
2.3.3 Wall Mounting with Wall Mount
Before you start:
You need to purchase a wall mount in advance.
Type I Wall Mount
Steps:
1. Drill Ø10 mm screw holes in the wall where you want
to install the wall mount.
2. Use M6 × 75 metal expansion bolts to fix the wall
mount onto the wall.
Figure 2-26 Fix Wall Mount
3. Use PM4 × 10 screws to fix the gang box onto the wall
mount.
Figure 2-27 Fix Gang Box
4. Repeat the step 4 to 7 of 2.3.1 Ceiling/Wall Mounting
to adjust the angle and finish the installation.
Figure 2-28 Finish Installation
Loading ...
Loading ...
Loading ...