Shiatsu Massage Cushion with Heat
User Manual
CF-1902B
2
Please read the following instruc�ons carefully before pu�ng your massage device
into use to ensure trouble-free opera�on and op�mum efficiency. Please retain
these opera�ng instruc�ons for further use!
• The massage device conforms to recognized technical principles and the latest safety
regula�ons.
• Do not wet,do not use pins, never remove cover.
• This items is NOT A TOY. Close supervision is necessary when this appliance is used by , on,
or near children or disabled persons.
• This appliance should never be le� una�ended when plugged in.
• Any possible repairs may only be carried out by authorized expert staff. Improper use and
unauthorized repairs are not permi�ed for safety reasons and lead to loss of warranty.
• Never touch the power plug with wet hands.
• Please avoid contact of the device with water, high temperatures and direct sunlight.
• Do not use any damaged cables, plugs or loose sockets.
• Never operate under blankets where the air opening may be blocked.
• If plugs or cords are damaged, they must be replaced by the manufacturer, a service
representa�ve or by qualified personnel.
• In case of malfunc�on, disconnect immediately from the mains.
• Do not use if you have skin disorders, open wounds,or swollen or inflamed areas.
• Misuse or incorrect use excludes any liability for damage.
• Do not use this device while driving.
• Do not use while you sleep.
• In order to avoid excessively s�mula�ng the muscles and nerves, the recommended
massage �me should not be exceeded 15 minutes at a �me.
• Each massage – even a hand massage – must be refrained from during pregnancy or if
one or more of the following complaints are present in the massage area: recent injuries,
thrombo�c diseases, all kinds of in flamma�ons and swellings, and cancer. It is
recommended to consult a doctor before having a massage for the treatment of ailments
and illnesses.
• If you are dependent on electrical aids e.g. pacemakers, please be sure to consult your
doctor for medical advice before taking a massage.
• The packaging material supplied should not be used as a toy.
Failure to observe the above instruc�ons may cons�tute misuse of the product
and can cause serious injury or burns.
Safety Instruc�ons
3
Instruc�on
CONTENTS
• Shiatsu massage cushion with heat
• 12V home adapter
TECHNICAL DATA
Measurements:
Weight:
Voltage:
Nominal Power:
14.2×5.3×18.9 inches
6.73 lbs
Input: AC 100-240V ~50/60Hz
Output: 12VDC 2500mA
30Wa�
Thank you for purchasing Comfier Massager.
With normal care and proper treatment, it will provide years of reliable service.
Please read all instruc�ons carefully before using this product.
Please retain this manual for future reference
FEATURES
- Genuine shiatsu back massage
- 2 levels of shiatsu intensity
- Programmed massasge mode
- Soothing heat func�on
- Carry handle design
4
Setup and Opera�on
• For your own safety we equip the massager with a protec�on against over-hea�ng.
Heat is created in the motors when placed under great stress and excessive pressure. Before
this could create any risk and a�er a run�me of 15 Minutes. The massager will switch off
automa�cally and will only allow switching on again a�er an appropriate down�me.
• Likewise, you should allow your body some rest periods. To avoid straining your muscles too
much, we recommend to not exceed a con�nuous massage of 15 Minutes.
• This device will switch off automa�cally a�er 15 minute �mer run out.
• Do not set up or use the massager in a bathroom or similary wet / damp areas.
• Do not use this device while driving.
Power Bu�on
Press to turn on the
massager and ac�vate
shiatsu clockwise rota�on
at high level, Press again to
ac�vate automa�c mode,
press once again to
turn off the massager
Direc�on Bu�on
When the massager is
turned on,Press to shi�
Shiatsu clockwise rota�on
to Shiatsu an�-clockwise
rota�on
Intensity Bu�on
When the massager is
turned on,Press to set
the shiatsu intensity at
high or low level
Heat Bu�on
When the massger is turned
on. Press to turn on or off
the heat
1. A�ach the massager to a chair with elas�c straps or place it on other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the home adapter into an outlet between 100-240V.
4. Turn on the device using the control panel ( instruc�ons as below).
5. The detachable intensity control flap lets you choose a so�er or more intense massage.
7. You also may so�en the massage pressure by placing a blanket or towel between you
and the device.
5
Care and Cleaning Instruc�ons
TROUBLESHOOTING GUIDE
1. Do not wash in washing machine or immerse the product or the adapter in water.
2. Always switch off before cleaning and remove the adapter from the socket with clean, dry hands.
3. The massager should be wiped with a slightly moist cloth and dried thoroughly. Do not wipe
the product with alcohol or harsh chemicals such as thinner or bleach.
4. Keep away from heat, fire or exposure to direct sunlight.
5. Do not apply excessive pressure or impact onto massager/massage heads. Applica�on of a
direct force in excess of 110 lbs. may damage your massager and invalidate your warranty.
Refrain from over usage of the device.
6. Store the massager in a cool, dry place out of reach of children.
7. Avoid contact with sharp edges or pointed objects which might cut or puncture the cover
of massager.
Massage heads rota�ng at
reduced speed.
Fault Solutions
The load on the massage heads is excessive. Reduce
load and try again.
Device switches off suddenly
Jerky mo�on of massage heads /
Vibra�ons from device
Excessive pressure may have been applied onto the
device. Reduce the load and try again.
Device may be jammed. Remove pressure / load
from the device and press the ‘Power’ bu�on to try
again.
Infra-red lights are on but no
mo�on from massage heads
Device may have been in use for 15mins. Auto-shut-
off func�on ac�vated. Con�nue using by pressing the
‘power’ bu�on a�er res�ng the unit for 15mins.
Over-heat protec�on func�on ac�vated. Device is
switched off for your safety. Please rest device for 15-
30mins before restar�ng.
The ba�ery is low,please charge in �me.
Check if adapter is plugged into socket and adapter
output is connected to device power inlet wire .
Check if device has been used for more than 15mins.
If so, let device rest for 15mins before con�nuing.
Device may require longer �me to cool in warmer
environments.
Device fail to start
6
Warranty
30 days uncondi�onally Return
Comfier product can be returned to receive a full refund for any reason within 30 days.
Please contact our customers service (supportus@comfier.com), our staff will contact
you within 24 hours.
90 days refund/replace
Comfier product can be returned / replaced within 90 days if the product break down
in the period of proper use.
12 months Warranty
If the product break down within 12 months in the period of proper use, customers can
enjoy the relevant warranty to get a replacement.
A�en�on!
No warranty will be given to any force majeure or man-made causes to the product,
such as improper care, personal tear down and willful damage,etc.
If you have any issue about the product, please feel free to contact us by sending
email to supportus@comfier.com We will strive to provide the best service
possible within 24 hours.
Tel: (248) 819-2623
Monday-Friday 9:00AM-4:30PM
Email: supportus@comfier.com
Extend Warranty for Free
1) Enter the following URL or scan the QR code below to find COMFIER facebook
page and like it, enter“Warranty” to messenger to extend your warranty from
1 year to 3 years.
h�ps://www.facebook.com/comfiermassager
OR 2) Send message“Warranty” and email us supportus@comfier.com to extend your
warranty from 1 year to 3 years.
Have queson ?
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protec�on against harmful interference in a residen�al
installa�on. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruc�ons, may cause harmful
interference to radio communica�ons.However, there is no guarantee that
interference will not occur in a par�cular installa�on. If this equipment does cause
harmful interference to radio or television recep�on, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separa�on between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Opera�on is subject to the following
two condi�ons: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
opera�on.
WARNING: Changes or modifica�ons to this unit is not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
FCC STATEMENT
