Loading ...
Loading ...
Loading ...
White Light Illuminator (If supported)
●
Possibly hazardous opcal radiaon emied from this product.
●
DO NOT stare at operang light source. May be harmful to the eyes.
●
Wear appropriate eye protecon or DO NOT turn on the white light when you assemble, install
or maintain the camera.
Transportaon
●
Keep the device in original or similar packaging while transporng it.
System Security
●
The installer and user are responsible for password and security conguraon.
Maintenance
●
If the product does not work properly, please contact your dealer or the nearest service center.
●
We shall not assume any responsibility for problems caused by unauthorized repair or
maintenance.
Cleaning
●
Please use a so and dry cloth when clean inside and outside surfaces of the product cover. Do
not use alkaline detergents.
Using Environment
●
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
beam, or it may burn out.
●
DO NOT expose the device to high electromagnec radiaon or dusty environments.
●
For indoor-only device, place it in a dry and well-venlated environment.
●
DO NOT aim the lens at the sun or any other bright light.
●
Make sure the running environment meets the requirement of the device. The operang
temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the operang humidity shall be 95%
or less (no condensing).
●
DO NOT place the camera in extremely hot, cold, dusty or damp locaons, and do not expose it
to high electromagnec radiaon.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn o the power, unplug the
power cable, and contact the service center.
Time Synchronizaon
●
Set up device me manually for the rst me access if the local me is not synchronized with
that of the network. Visit the device via Web browse/client soware and go to me sengs
interface.
Network Camera User Manual
vi
Loading ...
Loading ...
Loading ...