Hikvision DS-2CD2123G0-IS User Manual

Loading ...

Set Memory Card

If you choose to store the les to memory card, make sure you insert and format the memory card

in advance.

Before You Start

Insert the memory card to the camera. For detailed installaon, refer to Quick Start Guide of the

camera.

Steps

Go to storage management seng page: Conguraon → Storage → Storage Management →

HDD Management .

Select the memory card, and click Format to start inializing the memory card.

The Status of memory card turns to Normal from Uninialized, which means the memory card

can be used normally.

Oponal: Dene the Quota of the memory card. Input the quota percentage for dierent

contents according to your need.

Click Save.

Detect Memory Card Status

The device detects the status of Hikvision memory card. You receive nocaons when your

memory card is detected abnormal.

Before You Start

The conguraon page only appears when a Hikvision memory card is installed to the device.

Steps

Go to Conguraon → Storage → Storage Management → Memory Card Detecon .

Click Status Detecon to check the Remaining Lifespan and Health Status of your memory card.

Remaining Lifespan

It shows the percentage of the remaining lifespan. The lifespan of a memory card may be

inuenced by factors such as its capacity and the bitrate. You need to change the memory

card if the remaining lifespan is not enough.

Health Status

It shows the condion of your memory card. There are three status descripons: good, bad,

and damaged. You will receive a nocaon if the health status is anything other than good

when the Arming Schedule and Linkage Method are set.

Note

It is recommended that you change the memory card when the health status is not "good".

Click R/W Lock to set the permission of reading and wring to the memory card.

Add a Lock

Network Camera User Manual

Loading ...

Hikvision DS-2CD2123G0-IS 2 MP Outdoor WDR Fixed Dome Network Camera