Loading ...
Loading ...
Loading ...
- 28 - - 29 -
Risk of Injury:
• Unplug the appliance from the mains or switch
off the circuit breaker in the fuse box before
installation, cleaning, maintenance and repair
in order to avoid electric shock.
• The range hood may have sharp edges. Be
careful to avoid cuts and abrasions during
installation and cleaning. Do wear qualified
protective gloves.
Warning Before Installation
• Prior to installation, ensure that the exhaust
outlet is free of debris, as they may damage
the range hood.
• A straight and short ducting run will ensure a
high performance of the range hood.
• A curving and long ducting run should be
avoided, as it will lower the performance of
the range hood.
• Strictly seal the connection between the duct
and duct hole with duct tape. Ensure that the
connection between the duct and the duct cover
is secure, and seal it with aluminum tape.
• A small duct hole will lower the performance
of the range hood. Therefore, it is highly
recommended that you cut a duct hole equal
to or larger than 6" of the size.
6.2 Product Dimensions
Max 29"
(735mm)
Min 15"
(380mm)
10 7/8"
(275mm)
17 7/16"(442mm)
18 1/4"
(462mm)
13"
(330mm)
29 7/8"
(758mm)
6.3 List of Accessories:
Packing List
Standard Conguration
Product
1
Duct Cover
1
Gasket
1
Grease Cup
1
Product Manual
1
Installation Paper Template
1
Warranty Card
1
Duct Bracket
1
Bracket Screws ST5 × 65
5
Expansion Tubes
φ
8 × 50
5
Duct Cover Screws M4 × 18
4
Upper Plate Fastening Screws
M5 × 70
3
Fixing screws of the smoke bafe
plate M4×8
2
(
keep another
screw for backup)
Collision Avoidance Elements
2
Housing Assembly Accessories (optional)
Blower Housing
1
Decorative Cover
1
Decorative Cover Bracket
1
Safety Buffer Bafe
1
Duct Cover Screws M4 × 10
4
Base
2
Base Screws M4 × 8
2
Bracket Screws ST5 × 65
3
Expansion Tubes
φ
8 × 50
3
Screws ST2.9 × 19
2
Decorative Plate Assembly Accessories (with upper
cabinet)
6" or 12" Decorative Plate
1
Fixed Decorative Plate Screws
ST3.5 × 35
4
Base
2
Base Screws M4 × 8
2
Wall Preparation
The wall should be strong enough to support the
range hood. As for hollow wall or hollow plate, The
minimum thickness of the lumber should be 13/16"
(30mm). As for concrete wall, the installation can be
directly operated. The range hood should be rmly
xed on the wall.
Ductwork Installation
Risk of Injury:
• Unplug the appliance from the mains or switch
off the circuit breaker in the fuse box before
installation, cleaning, maintenance and repair
in order to avoid electric shock.
• The range hood may have sharp edges. Be
careful to avoid cuts and abrasions during
installation and cleaning. Do wear qualified
protective gloves.
• When cutting or drilling into walls or ceilings,
do not damage electrical wiring and other
hidden utilities.
• Ducted fans must always be vented to the
outdoors.
• To reduce the risk of fire and to properly
exhaust air, always duct air outside. Do not
vent exhaust air into spaces within walls,
ceilings, into attics, crawl spaces or garages.
Loading ...
Loading ...
Loading ...