Loading ...
Loading ...
Loading ...
- 24 - - 25 -
Risk of Fire:
Grease deposits in the grease filter and Grease
Cup may catch re.
Risk of Injury:
• Unplug the appliance from the mains or switch
off the circuit breaker in the fuse box before
installation, cleaning, maintenance and repair
in order to avoid electric shock.
• The range hood may have sharp edges. Be
careful to avoid cuts and abrasions during
installation and cleaning. Do wear qualified
protective gloves.
• While the range hood is in operation, do not
insert your hand into the area housing the fan.
• The appliance will become hot during
operation, especially near LED lights. Allow
the appliance to cool down before cleaning.
Do not touch lamps during or soon after
operation. Burns may occur.
• If you would like to schedule a deep cleaning
for your appliance, please contact our
authorized service center.
• Fotile suggests that you clean the surface of
the appliance for better use.
1) Neutral detergent may be used to clean
stains on the range hood. However, avoid
touching the control panel. Wipe some
detergent on the stains and let the detergent
sit. Do not let the detergent sit for an extended
period of time, as it can cause damages to the
appliance’s surface. Then, wipe off the stain
with a soft cloth and the left detergent with a
slightly wet cloth. Next, use another cloth to
dry the appliance.
2) Stains on the range hood should be cleaned
within a short time period, as to prevent the
stains from becoming permanent.
3) Abrasive detergents, such as a salt solution,
disinfectant or bleach powder cannot be used
to clean the appliance. Wipe off the detergent
with a wet, soft cloth. Next, use another cloth
to dry the appliance.
Warning: Do not clean the appliance with
abrasive tools, such as steel wool, brushes,
and coarse cloths, as these materials will
permanently scratch the surface of the hood.
Preparations before Cleaning:
1.Unplug the appliance.
2. Clear the cookware on the burners.
3. Prepare a neutral detergent and a soft cloth
(or soft brush) for stain removal and cleaning.
Washing and cleaning the surface, Grease
Cup, and grease lter:
(The cleaning can be done by the user)
1.Clean the surface of the hood and the back of
the smoke bafe plate.
2. Remove the oil cup horizontally and clean it.
Warning: For the safety of you and your family,
please regularly clean the oil accumulated in the
Grease Cup and deposits on the Grease Cup
surface. Do wear qualied protective gloves.
3.Hold the two sides of the grease lter and pull
sideward to unlock it.
★
Suggestion: In order to protect the health of
you and your family, the lter should be cleaned
regularly and it is dishwasher safe for your
convenience.
Warning: Please wear the qualified protective
gloves in operation.
Replacing LED Lights:
1.Unplug the appliance.
2. Use a small flat-head screwdriver to gently
pry the LED assembly out.
3. Disconnect the wires and then replace the
LED lights.
Risk of Electric Shock:
Before changing the LED lights, unplug the
appliance from the mains or switch off the circuit
breaker in the fuse box.
Loading ...
Loading ...
Loading ...