Loading ...
Loading ...
Loading ...
GXT002516—UN—31JUL15
Mower deck shown removed from machine for better view.
● From the left side of machine, insert a 3/8 inch ratchet into the
square hole (C) in the tension arm and pull clockwise and hold
to release tension on the belt.
GXT002519—UN—31JUL15
Mower deck shown removed from machine for better view.
● Raise left spindle cover (D) and remove belt (E) from spindle.
● Remove belt from clutch sheave.
GXT002429—UN—16JUL15
7. Remove locking clip (F) from the front draft link (G) and remove
draft link from the mower deck bracket (H) and draft bracket (I).
Repeat on the opposite side.
MX101521—UN—09JUN20
8. Remove spring clip (N) and pin (O) from each side of the rear
hanger bracket.
9. Rotate front caster wheels to maximize clearance.
10. Slide mower out from under the machine, move pedal to keep the
lift bracketry out of the way (if needed).
● Do not operate the machine without the mower deck: Machine
may become unstable without the mower deck attached. Move
machine only by hand. (See Moving Machine by Hand in
Operating section.)
SB31882,00003F4-19-29JUN20
Installing Mower Deck
1. Park machine safely. (See Parking Safely in the Safety section.)
2. Allow engine and muer to cool completely.
CAUTION: Avoid injury! Rotating blades are dangerous.
Before adjusting or servicing mower:
• Disconnect spark plug wires or battery negative (-) cable to
prevent engine from starting accidentally.
• Always wear gloves when handling mower blades or
working near blades.
3. Slide mower deck under the machine, move pedal to keep lift
bracketry out of the way (if needed).
GXT002432—UN—31JUL15
4. Install the pin (A) and spring clip (B) onto each side of the rear
mower bracket.
Service Mower
47
Loading ...
Loading ...
Loading ...