Loading ...
Loading ...
Loading ...
MX101477—UN—11MAY20
7. Remove the heat shield (J).
MX101478—UN—11MAY20
8. Remove six screws (K) securing spark arrestor cover (L) to the
muer (M).
9. Visually inspect the screen for tears, broken wires, or loose welds.
Replace the spark arrestor assembly if any of these conditions
exist.
10. If the screen is in good condition, brush away any loose debris
using a wire brush.
11. Install the spark arrestor and cover on muer and secure in place
with six screws.
NOTE: If the muer sustains damage during the removal or
installation process, replace muer.
12. Install heat shield.
13. Install the frame tube and secure with four carriage bolts and lock
nuts.
14. Install engine guard and secure in place.
15. Install two push retainers to fenders.
Z545R
MX101503—UN—11MAY20
1. Remove blunt nose screw and the spark arrestor from the end of
exhaust pipe (A).
NOTE: Observe direction of arrestor inside exhaust pipe for
reassembly.
2. Visually inspect the screen for tears, broken wires, or loose welds.
Replace the spark arrestor assembly if any of these conditions
exist.
3. If the screen is in good condition, brush away any loose debris
using a wire brush.
MX101504—UN—11MAY20
4. Install the spark arrestor (C) on the exhaust pipe with blunt nose
screw (B).
NOTE: If the muer sustains damage during the removal or
installation process, replace muer.
SB31882,0000404-19-20AUG20
Service Transmission
Transaxle Oil
The transaxles are lled at the factory. Do not mix oil types.
The following oil is preferred:
● JD Hy-Gard™
NOTE: Use 10W-30 oil , if Hy-Gard™ is unavailable
SR99263,00000A8-19-26OCT18
Checking Transaxle Oil Level
1. Park machine safely on a level surface. (See Parking Safely in the
Safety section.)
IMPORTANT: Avoid damage! Hot hydraulic oil will expand and
show incorrect oil level. Check oil level:
• When oil is cold.
• With engine not running.
2. Allow machine to cool.
IMPORTANT: Avoid damage! Contamination can damage the
hydraulic system. Clean thoroughly around reservoir ll cap
before opening.
Hy-Gard is a trademark of Deere & Company
Service Transmission
40
Loading ...
Loading ...
Loading ...