Loading ...
Loading ...
Loading ...
● The hour meter (A) shows the number of hours the engine has run.
The hour meter is always active and cannot be reset.
● The fuel level (B) is indicated by the graph of ve segments in
increasing height. When the fuel tank has emptied to approximately
20%, the last segment will ash indicating approximately 30
minutes of fuel remaining.
SB31882,00003DB-19-12JUN20
Using Park Brake
CAUTION: Avoid injury! Children or bystanders may attempt
to move or operate an unattended machine.
Always lock the park brake and remove the key before
leaving the machine unattended.
Setting Park Brake
1. Raise park brake lever to lock park brake.
Releasing Park Brake
1. Lower park brake lever to unlock park brake.
TH84124,000024A-19-25JUL16
Using Key Switch
MX101440—UN—27APR20
A - STOP (o) position - With key in the STOP position, all switched
power is o and engine should not run.
B - Run (on) position - Turn key from STOP to this position, and all
switched power circuits will be on.
C - Start position - Turn key to start position to crank the engine.
Release key after engine has started and it will automatically return to
the on position. The engine will continue to run.
SB31882,00003DD-19-22MAY20
Using Mower Engagement Switch
● To Engage Mower - Pull mower engagement knob up.
● To Disengage Mower - Push mower engagement knob down.
MP47322,00F463F-19-15MAR13
Using the Motion Control Levers
CAUTION: Avoid injury! Learn use of the motion control
levers and practice at half throttle until becoming procient
and comfortable with the operation of the machine.
Do not move motion control levers from forward to reverse
or reverse to forward position rapidly. Sudden direction
changes could cause loss of control or damage the
machine.
Before using the machine, become familiar with the motion control
levers and how they respond. It is essential to know how the machine
accelerates, steers, and stops.
The functions of the motion control levers are:
● Dual function neutral position.
● Steering.
● Acceleration.
● Braking.
Start/Shutdown Position
MX101390—UN—07APR20
● Motion control levers must be in the start/shutdown position (A) and
the park brake locked (B) to start the engine.
● Forward and reverse movement of the motion control levers is
prevented when levers are moved to the start/shutdown position.
● Operator can exit mower with the engine running when the mower
engagement switch is disengaged, the motion control levers are in
the start/shutdown position and the park brake is locked.
● Motion control levers must be in the start/shutdown position to
safely enter and exit the operator seat.
Neutral Position
MX101391—UN—26JUN20
● Machine speed, motion, and direction can be controlled when the
engine is running, motion control levers are in the neutral position
(C), and the park brake is unlocked (D).
● To stop the machine for an emergency, move the motion control
levers quickly back to the neutral position.
Forward and Reverse Travel
Straight forward and reverse travel takes practice. If the machine does
not track in a straight line when going forward or reverse, the tracking
will require adjusting.
1. Move throttle control to the mow position, full throttle.
Operating
24
Loading ...
Loading ...
Loading ...