Loading ...
Loading ...
Loading ...
Installation
38
When the job is complete, the installer must
issue a certificate of conformity.
1 Extraction using a hood
2 Extraction without a hood
A Single natural draught chimney
B Single chimney with extractor fan
C Directly outdoors with wall- or window-
mounted extractor fan
D Directly outdoors through wall
Air
Combustion products
Extractor fan
5.4 Adaptation to different types of
gas
If other types of gas are to be used, the
nozzles must be replaced and the primary
air must be adjusted. In order to replace the
nozzles and adjust the burners, the hob top
must be removed.
Removing the hob top
1. Pull the knobs and the knob bezels
(where present) upwards to remove
them.
In order to be able to replace the
nozzles, the appliance must be
removed from the built-in unit.
Between knob and knob bezel
(depending on the model) there is
a spring that is not shown in the
figure.
Loading ...
Loading ...
Loading ...