Loading ...
Loading ...
Loading ...
Installation
35
EN
Gas leakage and operation of the
appliance must be tested by the installer
before leaving.
Check burner flames are blue in colour,
stable and completely ignite at both high
and low flame settings with no appreciable
yellow tipping, carbon deposition, lifting,
floating, lighting back or objectionable
odour.
Test burners individually and in
combination, when satisfied with the
operation of the cooker, please instruct the
user on the correct method of operation.
5.3 Section cut from the work surface
Create an opening with the dimensions
shown in the figure in the countertop of the
unit (mm).
Appliance dimensions (mm)
Position of gas and electrical connections.
(seen from below)
90 cm
Flush installation (version without strips
only)
After laying the adhesive seal (A) on the
glass surface and after positioning and
securing the hob, fill the edges with
insulating silicone (B) and wipe away any
excess.
In the event the hob needs to be removed,
cut the silicone using a cutter before
attempting to remove it (C).
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
L X Y
900 844 - 848 482 - 486
A35
B34.5
Loading ...
Loading ...
Loading ...