Loading ...
Loading ...
Loading ...
Motion Detector on a wall
Motion Detector in a corner
20 21
Where should you place your
Motion Detector?
• Install 7’ 6” above the floor, if possible.
• Install in a corner or on a flat
wall (see illustrations).
• Choose a location with a clear line of
sight, with no obstacles or blind spots.
How do you reduce false alarms?
• The Detector should not face a heat
source such as a stove, fireplace
or windows with direct sun.
• Never install a Motion Detector facing stairs.
• Make sure your pets can’t get close to the
Motion Detector by climbing on furniture.
• Use the app to adjust pet sensitivity settings.
• Keep the default settings. Only arm
the Motion Detector in Away Mode.
Install steps:
1. Follow the steps in the Ring app. To connect
your Motion Detector, pull the battery tab.
2. Using the app, specify where you will
place your Motion Detector; then give it
a unique name and assign it to a room.
3. If you’re mounting the Motion Detector
on a wall, clean the wall, then peel the
backing o the 2 pieces of tape located
on the back. If mounting it in a corner, peel
the backing o the tape on each of the
corners. Press and hold for 20 seconds.
Motion Detector
Ring Alarm Motion Detectors are designed
to detect intruders by monitoring your
spaces for changes in heat and movement
over time. By default, when armed in Away
mode, motion will set o the alarm.
Test Mode is designed to help you test for
blind spots, pets, and other environmental
triggers that can trigger false alarms. By
adjusting Motion Detector settings in
the app, you can set the device to ignore
your pets and only detect humans, or to
detect everything. In Test Mode, motion
is constantly detected, and when motion
stops, it will clear every few seconds.
Loading ...
Loading ...
Loading ...