Loading ...
Loading ...
Loading ...
Main Elevator Controller User Manual
47
4. Edit the device information, including the adding mode, the device name, the device IP
address, port No., user name, and the password.
7.3.4 Network Settings
Purpose:
After adding the access control device, you can set the uploading mode, and set the network center
and wireless communication center.
Select the device in the device list, and click Modify to pop up the modifying device information
window.
Click Network Settings tab to enter the network settings interface.
Uploading Mode Settings
Purpose
:
You can set the center group for uploading the log via the EHome protocol.
Steps:
1. Click the Uploading Mode tab.
2. Select the center group in the dropdown list.
3. Check the Enable checkbox to enable the selected center group.
4. Select the uploading mode in the dropdown list. You can enable N1/G1 for the main channel and
the backup channel, or select Close to disable the main channel or the backup channel.
Loading ...
Loading ...
Loading ...