Loading ...
Loading ...
Loading ...
48
TROUBLESHOOTING
Concern Potential Cause Common Solution
Water/Moisture/Frost Inside Refrigerator
Moisture
collects on
the inside of
refrigerator
walls.
• Weather is hot and humid.
• Flipper mullion
• The rate of frost buildup and internal
sweating increases.
• Adjust flipper mullion. (See To adjust the
flipper mullion in INSTALLATION.)
Water
collects on
the bottom
side of the
drawer cover.
• Vegetables contain and
give o moisture.
• It is not unusual to have moisture on
the bottom side of the cover. Move
the humidity control (some models)
to lower setting.
Water
collects in
the bottom
of the
drawer.
• Washed vegetables and fruit
drain while in the drawer.
• Water collecting in the bottom of the
drawer is normal. Dry items before
putting them in the drawer or store
produce in tightly sealed bags to help
reduce condensation inside of the drawer.
Water/Moisture/Frost Outside Refrigerator
Moisture
collects on
outside of
refrigerator
or between
doors.
• Weather is humid. • This is normal in humid weather.
When humidity is lower, the moisture
should disappear.
Food in Fresh Food Compartment
Food is
freezing.
• Temperature setting is
too low.
• Temperature sensor is
covered by food (right
side of fresh food area).
• Food is covering the
air ports.
• Move the setting to a higher degree.
• Allow space for air flow to the sensor.
• Allow space between the air ports
and the food.
Loading ...
Loading ...