Loading ...
Loading ...
Loading ...
14
DOOR REMOVAL
Bottom of the Doors
For
RIGHT DOOR,
turn pin 90˚
counter-
clockwise
For
LEFT DOOR,
turn pin 90˚
clockwise
To reset the door pin:
If you remove the doors at less than a 40°
angle, the pin returns to the home position.
You can reset it by turning the door upside
down and using a 5/32" Allen wrench to
rotate the left-hand pin 90° clockwise and
the right-hand pin 90° counterclockwise.
Once you reset the door pins, follow the
steps To reinstall the refrigerator doors.
3. Reinstall the top hinges and screws.
4. Insert and feed the water line back into
the conduit at the top left door hinge
until tube reappears at rear of unit.
Push
Push
5. Reconnect all harnesses.
6. Replace the top hinge covers
and screws.
7. Reconnect the water line to the
push-lock connection, and reinstall
the water line bulkhead cover at the
rear of the unit.
8. Reconnect the electrical power cord
to the wall outlet.
NOTE
Upon replacement, fully insert the tube
up to the marking line.
Loading ...
Loading ...
Loading ...