Loading ...
Loading ...
Loading ...
28
Cleaning the Ice Maker
Clean the ice maker and ice bin at
regular intervals, especially prior to
vacation or moving.
CAUTION
NEVER use an ice pick or similar
sharp instrument to break up the ice.
This could damage the ice bin and
dispenser mechanism.
To loosen stuck ice, use warm water.
Before replacing the ice bin, make sure
it is completely dry.
IMPORTANT
When removing or replacing the ice
bin, avoid rotating the auger in the ice
bin. If the auger accidentally rotates,
you must realign the auger by turning
it in 45° turns (see below) until the ice
bin fits into place with the drive mech-
anism. If you do not properly align the
auger when replacing the ice bin, the
refrigerator will not dispense ice. The
refrigerator door also may not close
properly causing warm air to leak into
the refrigerator compartment.
Removing Ice Bin
1. Turn o the ice maker.
2. Lift the ice bin up, and then pull it
straight out to remove.
3. Empty and carefully clean the ice
bin with mild detergent. Do not use
harsh or abrasive cleaners. Rinse
with clean water.
4. Allow the ice bin to dry completely
before replacing in the freezer.
5. Replace the ice bin. Turn the ice
maker on.
Remove and empty the ice bin if:
• An extended power failure (one
hour or longer) causes ice cubes
in the ice bin to melt and refreeze
together, jamming the dispenser
mechanism, after power is restored.
• You do not use the ice dispenser
frequently. Ice cubes will freeze
together in the bin, jamming the
dispenser mechanism.
AUTOMATIC ICE AND
EXTERNAL WATER DISPENSER
Adjusting Ice Bin Auger
Loading ...
Loading ...
Loading ...