Loading ...
Loading ...
Loading ...
31
CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly if
nicked, scratched, or exposed to sudden
temperature change. Allow the glass shelves
to stabilize to room temperature before
cleaning. Do not wash in the dishwasher.
You can easily adjust shelf positions in
the refrigerator compartments to suit
your needs. The shelves have mounting
brackets that attach to slotted supports
at the rear of each compartment.
STORAGE FEATURES
IMPORTANT
Note the air seal located at the rear of the
shelf. Mount the air seal on the far left side
of shelves located on the left side. Mount
the air seal on the far right side of shelves
located on the right side. This is to ensure
there is no interference with the large air
tower on the back wall of the cabinet. This
also applies to the crispers.
To change the position of a shelf:
1. Remove all food from the shelf.
2. Lift the front edge up and pull the
shelf out.
Reposition the Air Seal
For glass shelves:
1. Remove the air seal by pushing the
seal straight back.
2. Position the air seal toward the
outside edge of the shelf to avoid
the air tower when you push the
shelf back into place.
3. Install the seal by sliding the open
channel end of the seal onto the
back edge of the shelf until the seal
sits snug on the back of the shelf
and the flap sits at about a 10° angle
from the shelf surface.
To adjust the slide-under shelf:
1. Push the front half of the shelf
backward
toward the
rear of the
cabinet until
the rear half
shelf drops
down, and
then gently
continue
pushing the
front half
shelf back and under the rear half shelf.
Slide-Under Shelf
Shelves
3. Replace by inserting the mounting
bracket hooks into the desired
support slots.
4. Lower the shelf and lock into position.
Loading ...
Loading ...
Loading ...