Loading ...
Loading ...
Loading ...
en Cookware test
20
Display Setting Value
Set the automatic ventilation system start. - Switched off.
- The ventilation system starts at the preset power level.
- The ventilation system starts during operation via the
sensor.
1
Setting the sensor sensitivity for the ventila-
tion system.
- Lowest sensor sensitivity setting.
- Medium sensor sensitivity setting.
1
- Highest sensor sensitivity setting.
Set the fan run-on for the ventilation system. - Switched off.
- Switched on. If your hob is working in air extraction
mode, the ventilation system is switched on at the power
level for approx. 6 minutes. If the hob is working in air re-
circulation mode, the ventilation system is switched on at
the power level for approx. 30 minutes.
1
- Switched on via the sensor.
Restoring factory settings - Individual settings
1
.
- Factory settings.
1
Factory setting
23.2 To go to the basic settings
Requirement:The hob must be switched off.
1.
To switch on the hob, touch
.
2.
Within the next 10seconds, touch and hold for 4
seconds.
Product information Display
Customer service directory
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch to view the individual displays.
3.
Touch to access the basic settings.
a and light up as a presetting.
4.
Touch
repeatedly until the desired setting ap-
pears.
5.
Use the rotary knob to change the desired setting.
6.
Touch and hold for 4 seconds.
a The settings are saved.
23.3 Discarding changes to the basic
settings
▶
Touch
.
a All changes are discarded and not saved.
Cookware test
24 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. →Page19
24.1 Carrying out Cookware test
Requirement:As a single cooking zone, the flexible
cooking zone is set in such a way that only the indi-
vidual item of cookware is checked.
1.
At room temperature, place the cookware with ap-
prox.200ml water in the centre of the cooking zone
that best fits the base of the cookware in terms of
size.
2.
Call up the basic settings and select
.
3.
Turn the rotary knob. flashes in the cooking
zones.
a The function is switched on.
a After 10 seconds, the result appears in the cooking
zone displays.
24.2 Checking the result
You can see what the result means for the quality and
speed of the cooking process in the following table.
Result
The cookware is not suitable for the cooking zone
and therefore does not heat up.
The cookware is taking longer to heat up than ex-
pected and cooking is not progressing as well as
it ought to.
The cookware is heating up correctly and cooking
is progressing well.
To switch the function on again, turn the rotary knob.
Loading ...
Loading ...
Loading ...