Loading ...
Loading ...
Loading ...
AGRAS T50/T25
Unmanned Aircraft Flight Manual
88
©
2024 DJI All Rights Reserved.
Updating the Firmware
The firmware of the remote controller, aircraft, and other devices such as the intelligent charger
and multifunctional inverter generator can be updated together in the DJI Agras app. Follow the
steps below.
1. Power on the remote controller and the aircraft. Make sure that the remote controller has
access to the internet via Wi-Fi or the cellular dongle. The firmware file may be large. It is
recommended to use Wi-Fi.
2. A prompt appears at the bottom of the home screen in DJI Agras when a new firmware
update is available. Tap Device Management and then Firmware Update.
3. Connect the device to the USB-A port on the remote controller to update the firmware of
the intelligent charger or multifunctional inverter generator. Tap the dropdown menu for
each device and select the firmware. There will be a check mark on the device displayed
in the app when a firmware is selected for the corresponding device. Uncheck the mark to
cancel the update.
4. Tap Update All Selected to redirect to the update screen. The app will download the
firmware for all selected devices and update automatically.
5. Make sure all the devices are connected to the remote controller and wait for the update to
complete. The aircraft front LEDs will blink yellow during an update.
6. The aircraft front indicators will glow solid green after an update is completed. Restart the
remote controller and the aircraft manually. If the indicators glow solid red indicating that a
firmware update has failed, try running the update again.
DJI Assistant 2 (MG Series)
Configure settings of the basic parameters, copy flight records, and update aircraft and remote
controller firmware in DJI Assistant 2 (MG Series).
Installation and Launching
1. Download the DJI Assistant 2 (MG Series) installation file from the T50 or T25 download
page:
https://www.dji.com/downloads/softwares/assistant-dji-2-for-mg
2. Install and launch the software.
Using DJI Assistant 2 (MG Series)
Connecting the Aircraft
Connect the USB-C port under the bottom cover on the front of the aircraft to a computer with
a USB-C cable, and then power on the aircraft.
• Make sure to remove the propellers before using the software.
Loading ...
Loading ...
Loading ...