Loading ...
Loading ...
Loading ...
AGRAS T50/T25
Unmanned Aircraft Flight Manual
70
©
2024 DJI All Rights Reserved.
Charging / Conditioning / Replacing Batteries
Charging Batteries
Using the C10000 Intelligent Charger to charge the batteries. C10000 Intelligent Charger
supports both fast and slow charging. Different power cables are required to connect to
qualified power supplies when using different charging methods.
Fast Charging
1. Turn off the air circuit breaker for the three-phase AC power supply.
2. Take out the safety pins from the fast charging cables, connect the cables to the charger,
and insert the safety pins back in place.
• After connecting the fast charging cables to the charger, make sure to insert the safety
pins back into place to avoid damage caused by a loose connector.
3. Connect the two fast charging cables to a three-phase-five-wire industrial power supply:
Connect the hot wires (labeled L), neutral wires (labeled N), and ground wires (labeled PE) of
the fast charging cables to the hot terminals, neutral terminal, and ground terminal of the
three-phase power supply, respectively. Make sure to connect the two hot wires to different
hot terminals.
• Only qualified electricians wearing insulated gloves can perform the fast charging
connection.
• When using the fast charging connection, the input current required by the charger
exceeds 16A. DO NOT connect the fast charging cables to 16A or 10A power outlets.
1 2
3
L L N PE
Neutral Wire
Hot Wire
Hot Wire
Ground Wire
Loading ...
Loading ...
Loading ...