Loading ...
Loading ...
Loading ...
86
9.5 Video Loss
A video loss alarm occurs when the NVR loses video signals from a
camera. Video loss alarm is enabled by default.
1. Click Alarm > Video Loss. To disable video loss alarm for a
channel, click
, which then changes to .
2. Click
under Trigger Actions and set action(s) to trigger. For
more details, see 9.10 Alarm-Triggered Actions.
NOTE!
Video loss alarm cannot trigger recording, preset, preview
(live view) and snapshot actions for the current camera.
3. Click under Arming Schedule and then set the time when
actions will be triggered.
4. (Optional) Click Copy to apply the same settings to other
cameras.
9.6 Alert
The NVR reports an alert when an event occurs in the system. The
following are some alerts and their definitions in the system.
âš« IP Conflict: Devices on the network use the same IP
address.
âš« Network Disconnected: Network connection is lost.
âš« Disk Offline: A disk is not properly connected or is
damaged.
âš« Disk Abnormal: A disk can be detected but cannot be
accessed.
Loading ...
Loading ...
Loading ...