Loading ...
Loading ...
Loading ...
82
9.1.2 Alarm Output
1. Click Alarm > Input/Output > Alarm Output.
2. Click
under Edit for the desired camera, and then set the
default status and duration. After you have completed the settings,
click OK.
3. Click
under Arming Schedule and then set the time when
actions will be triggered.
NOTE!
To apply the same settings to other cameras, click Copy,
select cameras, and then click OK.
9.2 Motion Detection
When enabled, a motion detection alarm occurs if an object inside the
detection area moves to certain extent, and an alarm icon appears in
the upper right corner.
Motion detection is enabled on the NVR by default. Unless modified,
the detection area covers the full screen, and recording is triggered
only for the current camera. The settings remain if you disable motion
detection and then enable it.
1. Click Alarm > Motion.
2. Select the desired camera and then select Enable to enable
motion detection.
Loading ...
Loading ...
Loading ...