Loading ...
Loading ...
Loading ...
25
2. (Optional) To search a specified network segment, click Search
Segment and then set the address range.
3. You may choose one of the following ways to add an IP device:
âš« Click Add All to add all the discovered IP devices allowed
(depending on channels supported by the NVR).
âš« Click Custom Add. In the window displayed, enter the IP
address and complete other settings, and then click Add.
You may also click Search Segment and add discovered
cameras in the list.
âš« Click
Click
to add the camera.
Option 2
1. Click
in a window.
2. Select the desired IP device and then click OK.
Option 3
Use this option to add an IP device that is connected to a different
router, for example, when the NVR and the IP device are connected
across the Internet.
NOTE!
First you need to enable port mapping at Setup > Port > Port
Mapping on the IP device's Web interface.
1. Click Camera > Camera, click Custom Add.
2. Choose an option:
Loading ...
Loading ...
Loading ...