Loading ...
Loading ...
Loading ...
111
11.2.2 Alarm Service
Use this function to send alarm signals to an external alarm device
(for example, alarm control panel) when an alarm or an alert occurs
on the NVR.
1. Click Network > Platform > Alarm Service.
2. Select Enable Alarm Service, and set the server address and
SIP server port.
NOTE!
The NVR only sends alarm signals when an alarm or alert
occurs; users need to implement alarm receiving and
reporting for the external alarm device separately.
11.3 Advanced Configuration
11.3.1 PPPoE
The NVR allows access through Point-to-Point over Ethernet (PPPoE).
1. Click Network > Advanced > PPPoE.
2. Enable PPPoE by selecting the check box.
3. Enter the username and password provided by your Internet
Service Provider (ISP). Network information including IP address
appears when dial-up succeeds.
Loading ...
Loading ...
Loading ...