Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
36
3. Select No. 2 to No. 4, and repeat the step above to add the manual calibration sites.
Figure 6-7 Adding Calibration Sites
For each speed dome of the system, you shall add at least 4 calibration sites.
4 to 12 calibration sites can be configured. The Smart Linkage tracking gets
more accurate when you set more calibration sites.
The calibration sites should be separated evenly in the live view page.
Make sure all calibration sites are in the same actual plane. Do not set the
calibration sites in different planes to ensure the calibration effect.
Do not set multiple points on the same line, if so, one point of them will not
be useful for the calibration.
All the calibration sites should be set on the ground. If not, the PTZ camera
will track inaccurately
4. Perform the calibration operation.
1) Select calibration site No. 1 and the digital zoom view of site No. 1 appears
on the right.
2) Move and zoom in/out the speed dome to make sure the live views of dome
and the digital zoom view of selected site is mostly the same.
3) Click to save the current site position information.
Figure 6-8 Manual Calibration
Loading ...
Loading ...
Loading ...