Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
7
Chapter 3 Installation
3.1 Pre-Installation
● Make sure the device in the package is in good condition and all the assembly
parts are included.
● The standard power supply is 24V AC, please make sure your power supply
matches your camera.
● Make sure all the related equipment is power-off during the installation.
● Check the specification for the installation environment.
● Make sure that the wall is strong enough to withstand eight times the weight
of the camera and the bracket.
For the camera that supports IR, mind the following precautions to prevent IR
reflection:
● Do NOT remove the protective film until you finish the installation. For any
dust or grease on the cover, clean them with clean soft cloth and isopropyl
alcohol.
● Make sure that there is no reflective surface too close to the camera lens. The
IR light from the camera may reflect back into the lens causing reflection.
● Do NOT drag the camera with its waterproof cables, or the waterproof
performance is affected.
DO NOT lift the
camera by
lifting the cables
Figure 3-1 Do NOT Lift by Cables
3.1.1 Wide Range Coverage
For fixed lens camera, the auto-focus function, and remote manual focus function are
not supported.
Select the proper installation site, and proper lens focal length according to the Wide
Range Coverage list below:
Loading ...
Loading ...
Loading ...