Loading ...
Loading ...
Loading ...
en-us Service settings
18
To be able to use HomeConnect®, you must first set up
the connection to the WLAN home network (Wi-Fi
1
) and to
the HomeConnect® app.
After switching on the appliance, wait at least 2minutes
until internal device initialization is complete. Only then
should you set up HomeConnect®.
The HomeConnect® app guides you through the entire
registration process. Follow the instructions in the
HomeConnect® app to implement the settings.
Tip:Follow the instructions in the HomeConnect® app as
well.
Notes
¡ Also note the safety information in this instruction
manual and ensure that it is also observed when
operating the appliance using the HomeConnect® app.
→
"Safety", Page4
¡ Operating the appliance on the appliance itself always
takes priority. It is not possible to operate the appliance
using the HomeConnect® app during this time.
12.1 Setting up the HomeConnect® app
1.
Install the HomeConnect® app on your mobile device.
2. Start the HomeConnect® app and set up access for
HomeConnect®.
The HomeConnect® app guides you through the entire
registration process.
12.2 Setting upHomeConnect®
Requirements
¡ The HomeConnect®app is installed on your mobile
device.
¡ The appliance receives signals from the WLAN home
network (Wi-Fi) at its installation location.
1. Open the HomeConnect® app and scan the following
QR code.
RFTH1T01
2. Follow the instructions in the HomeConnect® app.
12.3 Remote diagnostics
The Customer Service can access your appliance via
Remote Diagnostics if you ask them to do so, if your
appliance is connected to the HomeConnect® server and
if Remote Diagnostics is available in the country where
you are using the appliance.
Tip:Further information and details about the availability
of Remote Diagnostics in your country can be found in the
Service/Support section of your local website: www.home-
connect.com.
12.4 Data Protection
See the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance
transmits the following types of data to the
HomeConnect® server (initial registration):
¡ Unique appliance identification (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
¡ Security certificate of the Wi-Fi communication module
(to ensure a secure data connection).
¡ The current software and hardware version of your
home appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the HomeConnect®
functions for use and is only required when you want to
use the HomeConnect® functions for the first time.
Notes
¡ Please note that the HomeConnect® functions can only
be used in conjunction with the HomeConnect® app.
Information on data protection can be retrieved in the
HomeConnect® app.
¡ It is possible that users, persons or spaces outside of
the appliance may be captured by the cameras and
therefore displayed in the HomeConnect® app. Such
photos are processed in the HomeConnect® system
for the purpose of provision in the HomeConnect® app.
Information on data processing can be retrieved in the
HomeConnect® app.
Service settings
13 Service settings
Service settings
You can implement various service settings.
13.1 Changing service settings
1.
Swipe to "Service".
a "Application Info" lights up.
2. Touch and change the desired service setting.
1
Wi-Fi is a registered trade mark of the Wi-Fi Alliance.
Loading ...
Loading ...
Loading ...