Loading ...
Loading ...
Loading ...
8
3. The appliance is supplied with the brackets mounted. The
edge of the bracket is mounted downwards, during installation
turn the edge in upward direction.
D
C
E
A
A
B
B
A
A. Anti-tip brackets
B. Top brackets
C. 20
15
/
16
" (531 mm)
D. 1
1
/
2
" (38 mm)
E. 13/16" (20 mm)
Location Requirements
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline,
away from appliance.
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor, household
use only.
This appliance is intended to be used in a household and similar
applications such as:
� Staff kitchen areas in shops, offices and other working
environments.
� Farm houses and by clients in hotels, motels and other
residential type environments.
� Bed and breakfast type environments.
� Catering and similar non-retail applications.
To ensure proper ventilation for your refrigerator, allow for 1/8"
(3.2 mm) of space on each side and at the top. When installing
your refrigerator next to a fixed wall, leave 7
1
/
4
" (185 mm)
minimum on the hinge side to allow for the door to swing open.
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Before you move your refrigerator into its final location, it is
important to make sure you have the proper electrical connection.
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person.
Do not use a cord that shows cracks or abrasion damage along its
length or at either the plug or connector end.
Recommended Grounding Method
A 110 V-120 V, 60 Hz AC only, 15 A fused, grounded electrical
supply is required. It is recommended that a separate circuit
serving only your refrigerator and approved accessories be
provided. Use an outlet that cannot be turned off by a switch. Do
not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or
removing a light bulb, turn the refrigerator to OFF. Depending on
your model, turn the refrigerator control to the word OFF, or press
the refrigerator down arrow touch pad until a dash (–) appears in
refrigerator displays as shown. Disconnect the refrigerator from
the electrical source. When you are finished, reconnect the
refrigerator to the electrical source and reset the temperature
controls to the desired setting. See “Quick Start Guide.”
Electrical zone
Alt electrical zone
(inside cabinet
above column)
Alt electrical zone
B
A
D
E
C
A. 30" width x 12" height
B. 30" width x 3
1
/
2
" height
C. 26
1
/
2
" width x 6
1
/
2
" height
D. 4
1
/
2
"
E. 1
3
/
4
"
Loading ...
Loading ...
Loading ...