Loading ...
Loading ...
Loading ...
Port configuration
43
3
3.4.4. Loopback-detection control recovery configuration
This page is used to configure loop detection to automatically return to an
uncontrolled state.
To display the “Loopback-detection control recovery configuration” page, click Port
configuration -> Port Loopback-detection configuration -> Loopback-detection control
recovery configuration，click "Apply" to configure.
entry
describe
Recovery switch timeout
When a port is disabled or blocked
due to a loop, it automatically
recovers to an uncontrolled time，
the size range is 0-3600 seconds.
When it is configured as 0, the auto
recovery function is disabled.
3.5. Isolate-port configuration
This section can set up port isolation related functions.
3.5.1. Isolate-port group configuration
This page can be used to add or delete isolated groups.
To display the “Isolate-port group configuration ” page, click Port configuration ->
Isolate-port configuration -> Isolate-port group configuration, click "Apply" to
configure.
Loading ...
Loading ...
Loading ...