Loading ...
Loading ...
Loading ...
6
Console Port Interface
The PoE smart switch has a monitor port (Console port). Rate 9600bps,
standard RJ-45 plug.
Use a dedicated monitoring cable to lead the port to the PC serial port connection,
as follows:
The RJ-45 connector used by the Console port is shown in the figure below,
and the RJ-45 plug corresponds to the RJ-45 socket, from left to right
numbered from 1 to 8.
This cable is used to connect the console port of the switch to the external
monitoring terminal. One end of the RJ-45 eight-pin plug, the other end is a
25-hole plug (DB25) and 9-hole plug (DB9), RJ-45 head into the switch’s
console port socket, DB25 and DB9 can be used according to the requirements
of the terminal serial port, the cable internal connection schematic as follows:
Loading ...
Loading ...
Loading ...