Hikvision DS-2SF8C442MXG-EL/26 User Manual

Loading ...

5.1.13 Conduct 3D Posioning

3D posioning is to relocate the selected area to the image center.

Steps

Click to enable the funcon.

Select a target area in live image.

Le click on a point on live image: the point is relocated to the center of the live image. With

no zooming in or out eect.

Hold and drag the mouse to a lower right posion to frame an area on the live: the framed

area is zoomed in and relocated to the center of the live image.

Hold and drag the mouse to an upper le posion to frame an area on the live: the framed

area is zoomed out and relocated to the center of the live image.

Click the buon again to turn o the funcon.

5.1.14 OSD Menu

When network access is unavailable, you can call the Preset No.95 to show OSD menu to start

device conguraon.

Click direcon buons or

and to move up and down.

Click to conrm your selecon.

5.1.15 Display Target Informaon on Live View

Go to Conguraon → Local → Live View Parameters for sengs.

Note

Related smart funcon should be congured and enabled in advance.

Display POS Informaon

POS informaon refers to the target features, such as target ID, etc. Supported POS informaon

types varies according to device models.

5.2 Set Transmission Parameters

The live view image may be displayed abnormally according to the network condions. In dierent

network environments, you can adjust the transmission parameters to solve the problem.

Steps

Go to Conguraon → Local .

Set the transmission parameters as required.

TandemVu PTZ Camera User Manual

Loading ...

Hikvision DS-2SF8C442MXG-EL/26 TandemVu 8C Series Panoramic 4 MP 42X DarkFighter Network Speed Dome