Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/55223284-ds-2sf8c442mxg-el-26/bg1e.png)
Go to VCA → Intell Trac Event → Common Sengs → Basic Conguraon to complete the
sengs.
Basic Informaon
Select the Country/Region.
Listening Server
If the device uploads alarms in listening mode via our company's SDK, you should set the IP
address and port for the listening server.
ANR
When the network is disconnected, data is temporarily saved on the memory card. When the
network connecon is resumed, the device automacally uploads the saved data to the arming
host, in which case, the arming host IP address is required.
Note
A memory card should be installed in the device. Memory card sengs should be completed.
See Memory Card for instrucons.
3.5.2 Common Sengs
These are the commonly used sengs for all types of ITS detecons.
Set Lane Area
A lane area is where you want to set the detecon rules. Mark the lane area according to the
actual lanes in the view.
Steps
1.
Go to VCA → Intell Trac Event → Common Sengs → Speed Dome Rule Sengs and click
Lane Area.
2.
Click Add.
Blue lane lines and a trigger line show on the live view.
3.
Drag the lane lines to frame the actual lane on the image.
Note
●
You can click Full Screen to enlarge the live view window. Press ESC on the keyboard to exit.
●
Lane lines cannot overlap.
4.
Select the direcon of the trac and line type of the le and right lane lines according to the
actual situaon.
5.
Drag the trigger line to adjust its length and posion.
The trigger line is where the device captures the vehicle pictures in some detecons and where
trac data collecon is triggered.
6.
Oponal: Repeat the steps above to set mulple lane areas.
TandemVu PTZ Camera User Manual
18
Loading ...
Loading ...
Loading ...