Loading ...
Loading ...
Loading ...
4) Adjust PTZ to place the green cross in the PTZ channel at the same posion as the green cross
in the panoramic channel. 1× zoom rao is recommended.
Note
To quickly locate the desired point in the PTZ channel, you can click and click the target
posion in the PTZ channel.
5) Click to save the PTZ posion of this calibraon point.
6) Repeat the steps above to set at least 4 calibraon points.
7) Click Start Calibraon.
5.
Click Save to nish calibraon.
4.15.2 Set Tracking Parameters
The tracking parameters includes the inial tracking posion, tracking zoom rao, tracking
duraon, and advanced parameters.
Steps
1.
Go to Conguraon → PTZ → Panorama Tracking → Calibraon .
2.
Set the inial tracking posion of the PTZ channel.
When the tracking task stops, the PTZ channel returns to the set inial posion.
1) Adjust the PTZ channel to the desired scene as the inial posion.
2) Click Set Tracking Inial Posion to save the posion.
3.
Set the tracking zoom rao.
Set a xed
zoom rao
A xed zoom rao means the PTZ channel keeps the set zoom value
throughout the tracking.
Adjust the Self-adapve Rao Coecient to 0.
Adjust the zoom to a desired level.
Click Set Zoom Rao to save the zoom level.
Set auto zoom
rao control
The device determines the actual zoom rao dynamically according to the
detected target size and the set Self-adapve Rao Coecient.
Larger Self-adapve Rao Coecient means larger zoomed target during
tracking.
4.
Set the tracking duraon.
-
When you set the Tracking Duraon as 0, the PTZ channel keeps tracking the target unl it
leaves the view of the panoramic channel.
-
When you set the Tracking Duraon as a number other than 0, the PTZ channel tracks a target
for the set me. The tracking stops when the me is up or when the target leaves the view of
the panoramic channel.
5.
Click Save.
6.
Go to Conguraon → PTZ → Panorama Tracking → Advanced .
7.
Oponal: Check to enable Tracking Takeover.
TandemVu PTZ Camera User Manual
55
Loading ...
Loading ...
Loading ...