Loading ...
Loading ...
Loading ...
Upload by FTP
Upload the data of enforcement, vehicle detecon, and trac data collecon to an FTP server.
Before You Start
The FTP server is congured.
Steps
1.
Go to VCA → Intell Trac Event → Advanced Conguraon → FTP Host
2.
Check Enable FTP.
3.
Select a Character Encoding Mode.
4.
Enter the IP Address, Port, User Name, and Password of the FTP server.
5.
Set the picture names and saving paths of detecons.
6.
Click Save.
Upload by SDK
Upload the alarm messages by SDK in listening and arming mode.
Go to VCA → Intell Trac Event → Common Sengs → Basic Conguraon to set the parameters.
Listening Server
You can upload alarm messages and pictures to a listening server by SDK. Enter the IP Address and
Port of the listening server and click Save.
Note
Make sure that the listening server is enabled with listening service and that the network
connecon with the device is normal.
ANR
You can upload alarm messages and pictures to an arming server by SDK. Enter the Arming Host IP
Address and click Save. When the device loses connecon with the arming server, the data is saved
in the memory card of the device and will be uploaded again when the connecon resumes.
Set Armed License Plates
You can specify the vehicles you want to arm by adding their license plates to the blocklist or
allowlist.
Steps
1.
Go to VCA → Intell Trac Event → Advanced Conguraon → Blocklist & Allowlist .
2.
Click Export to export license plate list template.
TandemVu PTZ Camera User Manual
35
Loading ...
Loading ...
Loading ...