Loading ...
Loading ...
Loading ...
Headlights.
Push PTO button.
Start engine.
Warning! Battery acid is
corrosive, explosive and
flammable.
Keep body parts away
from rotating parts.
yyyywwxxxx The rating plate shows
the serial number. yyyy
is the production year
and ww is the production
week.
Note: Other symbols/decals on the product refer
to certification requirements for some commercial
areas.
Steering controls
The direction of the product is controlled by the 2
control levers.
The control levers must be moved out to the park
position (A) to start the product. The control levers
can be moved forward and rearward from the neutral
position (B). Refer to
To operate the product for the
first time on page 11
.
A B
Operator Presence Control (OPC)
The OPC engages when the operator lifts from the
seat. The engine and the drive to the blades stop if
the blades are engaged or the parking brake is not
applied. Refer to
Operation conditions on page 9
.
Ignition key
The ignition key has 4 positions:
• Start position (A)
• Run position (B)
• Headlight position (C)
• Stop position (D)
A
B
C
D
Headlights
A
B
C
D
• Turn the ignition key to the headlight position (C)
to operate the product with the headlights on.
• Turn the ignition key to the run position (B) to
operate the product with the headlights off.
PTO (Power Take-Off) button
The PTO button engages and disengages the PTO
clutch and the cutting deck or other equipment
connected to it. The correct start conditions must
be obeyed to engage the drive of the blades. Refer
to
Operation conditions on page 9
for the correct
start conditions.
• Pull the PTO button out to engage the drive to
the blades or other equipment.
2281 - 001 - 03.11.2023
5
Loading ...
Loading ...
Loading ...