Loading ...
Loading ...
Loading ...
Cutting height setting Cutting height, in./cm
2 1.75/4.4
3 2.0/5.1
4 2.25/5.7
5 2.5/6.4
6 2.75/7.0
7 3.0/7.6
8 3.25/8.3
9 3.5/8.9
10 3.75/9.5
11 4.0/10.2
12 4.25/10.8
Transport position 4.5/11.4
To start the engine
1. Sit in the seat.
2. Set the cutting deck to the transport position.
Refer to
To set the cutting deck in transport
position or mow position on page 13
.
3. Engage the parking brake. Refer to
To engage
and disengage the parking brake on page 12
.
4. Move the throttle control (A) to ½ throttle
position.
A
B
5. Push and turn the ignition key (B) to the start
position.
6. Release the ignition key immediately when the
engine starts.
Note:
Do not keep the ignition key
in the start position for more than 5
seconds at a time. If the engine does
not start, wait 15 seconds before you
try again.
7. Let the engine run at ½ throttle for 3–5 minutes
before you apply full throttle.
8. Push the throttle control to the full throttle
position.
To operate the product
1. Start the engine. Refer to
To start the engine on
page 14
.
2. Disengage the parking brake. Refer to
To
engage and disengage the parking brake on
page 12
.
3. Carefully push the 2 control levers forward. The
product will start to move forward. The forward
speed increases the more the 2 control levers
are pushed forward.
4. Carefully pull the 2 control levers rearward. The
product will start to move rearward. The rearward
speed increases the more the 2 control levers
are pulled rearward.
5. Put the 2 control levers in neutral position to
decrease the speed and stop the product.
6. Do the steps that follow to turn left or right when
you go in a forward direction.
a) Pull the left control lever rearward in the
direction of the neutral position to make the
product turn left. The more you pull the left
control lever rearward, the more the product
will turn left.
14
2281 - 001 - 03.11.2023
Loading ...
Loading ...
Loading ...